If the ground installation is uneven, how should we deal with SPC stone plastic flooring? During the installation process, we require the ground to be level. If there is any unevenness, we should first perform self leveling; If the flat area is relatively small, gypsum can be directly scraped off, and the labor cost is relatively low. The cost of gypsum powder and glue is also very low. A house costs about one hundred yuan; If the area is uneven, you can wipe it with cement. You need to let the cement dry, otherwise it is easy to wet the floor; You can also use bedding. This kind of correction effect is also very good.
The maintenance of stone plastic flooring should also be done well. When the indoor humidity is less than 40%, the humidity should be increased in a timely manner. When the humidity is greater than 80%, ventilation and dehumidification should be carried out in a timely manner; When encountering heavy objects moving, do not pull hard to avoid scratching the floor; When the sun is strong, do not expose to the floor for a long time; Do not use water even if soaked on the floor for a long time. Timely use a mop to remove water stains and keep the floor dry and clean. If there are stains, they should be cleaned up in a timely manner. Do not use damaged items to clean the floor; If the room is not occupied for a long time, remember to ventilate. Suggest placing a floor mat at the door to prevent a large amount of sand and dust from entering the room.