Reasons For Bulges And Warped Edges in SPC Stone Plastic Flooring

Nov 25, 2023

Leave a message

SPC stone plastic flooring is a relatively environmentally friendly type of flooring that has been used in many of our occasions, and it has many advantages compared to our ordinary flooring.
But we will find that there are bulges or warped edges when using SPC stone plastic flooring. Is the reason for this situation related to construction?
In fact, we have requirements for the original ground before construction. The original ground needs to be ensured to be flat. Within any two square meters, when crossing the ground with a two meter straight edge, the height difference between the top and bottom cannot exceed three millimeters.
The surface of the grassroots should have no cracks, and its ground should be free from sand, hollowing, cracks, oil stains, accumulated water, and other dirt. Otherwise, it may also cause bulging and warping.
Our SPC stone plastic flooring needs to be placed for at least 24 hours during the paving process to ensure consistency between our materials and the environment and temperature of the occasion.
The above is the knowledge on how to avoid bulging and warping in SPC stone plastic flooring, hoping to provide some help and reference value to everyone.